[Plugin] EnigmaLight / Ambilight für Enigma2 Receiver (OE1.6, OE2.0 ,OE2.2, OE2.5) Dreambox, openATV, VTI

pclin · 13. Januar 2021, 22:22

enigmalight-bin_oatv and enigma2-plugin-extensions-enig…t54+b3d012c-r1.12_all.ipk upload to /tmp

Quellcode

opkg remove enigma2-plugin-extensions-enigmalight
opkg remove enigmalight
opkg update
opkg install /tmp/*.ipk

copy the output.

regards pclin

Petans · 14. Januar 2021, 07:34

Log

Edit by Anz:
Bitte einen so langen Text immer in einen Spoiler packen

Please always put long text in a spoiler

Petans · 14. Januar 2021, 08:11

If Enigmalight is not (uninstalled) in Octagon, I put enigmalight-bin_oatv in / tmp / and put opkg update and opkg install /tmp/*.ipk in the terminalThis is the output:

Welcome to openATV for sf4008
openatv 6.4 sf4008

sf4008 login: root
Password:
root@sf4008:~# opkg update
Downloading feeds2.mynonpublic.com/6.4/sf4008/3rdparty/Packages.gz.
Updated source 'openatv-3rdparty'.
Downloading feeds2.mynonpublic.com/6.4/sf4008/all/Packages.gz.
Updated source 'openatv-all'.
Downloading updates.mynonpublic.com/oea/4.…hf-neon-vfpv4/Packages.gz.
Updated source 'cortexa15hf-neon-vfpv4-3rdparty-secret-feed'.
Downloading feeds2.mynonpublic.com/6.4/sf4…hf-neon-vfpv4/Packages.gz.
Updated source 'openatv-cortexa15hf-neon-vfpv4'.
Downloading feeds2.mynonpublic.com/6.4/sf4008/sf4008/Packages.gz.
Updated source 'openatv-sf4008'.
Downloading feeds2.mynonpublic.com/6.4/sf4…4008_3rdparty/Packages.gz.
Updated source 'openatv-sf4008_3rdparty'.
root@sf4008:~# opkg install /tmp/*.ipk
Refusing to load file '/tmp/enigmalight-bin_oatv_0.4-rc4_all.ipk' as it matches the installed version of enigmalight-bin (oatv_0.4-rc4).
Unknown package '/tmp/enigmalight-bin_oatv_0.4-rc4_all.ipk'.
Collected errors:
* opkg_solver_install: Cannot install package /tmp/enigmalight-bin_oatv_0.4-rc4_all.ipk.
root@sf4008:~#

pclin · 14. Januar 2021, 09:32

Quellcode

opkg remove enigmalight-bin --force-depends
opkg install /tmp/enigmalight-bin_oatv_0.4-rc4_all.ipk

regards pclin

Petans · 14. Januar 2021, 10:41

Now the file "enigmalight-bin_oatv_0.4-rc4_all.ipk" can be installed. But the result is still the same. If I install the file "enigma2-plugin-extensions-enigmalight_1.0 + git54 + b3d012c-r1.12_all.ipk", then the lights do not work, neither Test nor Moodlamp can be run.When I install the Enigmalight plugin from the receiver menu, Test and Moodlamp work. Not dynamic mode.

Petans · 14. Januar 2021, 10:57

This is a last crash log:

pclin · 14. Januar 2021, 15:06

Terminal

Quellcode

enigmalight -m 2

copy output

regards pclin

Petans · 14. Januar 2021, 15:27

Log

Edit by Anz:
Bitte einen so langen Text immer in einen Spoiler packen

Please always put long text in a spoiler

Petans · 15. Januar 2021, 07:53

Is the previous LOG already OK?
I still thought, the 4K Octagon SF4008 receiver has three USB outputs. Does it matter here in which cable the cable is connected? I tried to connect the cable to all three, but the result is still the same. The lights cannot be switched on in the Enigmalight plugin, "Turn lights on" is still on the screen, and after pressing the green button, a message appears stating that the lights are on, but the message "Turn lights on" pops up again. Neither Test nor Moodlamp work. I'm installing the first two .ipk files from the first page.
On page 22, Marc * wrote this: "Dynamic mode only works if the enigmalight binary from the package" enigmalight-bin_oatv_0.4-rc4_all.ipk "works on your box." How do I know if this file works?

pclin · 15. Januar 2021, 09:01

Post #448

regards pclin

Petans · 15. Januar 2021, 10:25

I am sorry, but i do not understand. Post #448 is my LOG.

Petans · 15. Januar 2021, 14:16

Another note:
Enigmalight plugin installed via receiver menu and "enigmalight-bin_oatv_0.4-rc4_all.ipk". Test - OK, Moodlamp - OK. When I run the Test in the Enigmalight plugin (yellow button) and confirm that the Test is OK, an error message is displayed (photo in the attachment). LOG is also included.

Petans · 15. Januar 2021, 15:03

Is there anyone please who has a 4K Octagon SF4008 receiver and has Enigmalight (Ambilight) working on it?

marc* · 15. Januar 2021, 16:44

We are still missing the output of the enigmalight binary and I don't think anybody can help you without that. The packages are installed, so the opkg output is not relevant anymore.
As pclin said (I guess he meant his post #447), please do the following and post the output here:

Quellcode

enigmalight -m 2 -d

pclin · 15. Januar 2021, 18:46

Post #448

regards pclin

Petans · 15. Januar 2021, 20:19

I don't know how I did it, but dynamic mode started working. I will still have to set the colors, etc., but most importantly it already works somehow.But I definitely didn't use the file "enigma2-plugin-extensions-enigmalight_1.0 + git54 + b3d012c-r1.12_all.ipk ". Nothing worked for me with this file. I'll try the procedure again and then write it here. Maybe it will help someone someday.Now I want to thank those who have had patience with me and have always advised me - pclin, marc *, schwatter and zorro69.

pclin · 15. Januar 2021, 21:03

Make a image backup first!regards pclin

spanierx · 15. Januar 2021, 22:02

Guten Tag. ich schreibe mal für meinen Vater. Wir sind kurz vom verzweifeln

Folgendes Problem: Das NodeCMU bekommt kein Signal von Enigmalight...
Jedoch wenn wir am PC über das Google-Chrome Plugin "Hyperion Remote Control" die LED's steuern, funktioniert es einwandfrei.

Das NodeMCU-Board ist aufjeden fall im Netzwerk:

Enigmalight-Config:
pastebin.com/r3BSKzZk (Quellcode ging nicht weil ich dann über 10000 Zeichen komme )

Enigmalight-Log:

Shell-Script

21:41:25.035820 [CMainLoop::Process] Opening listening socket on 127.0.0.1:19333 21:41:25.038110 [CGuiServer::Process] Start GuiServer 21:41:25.038233 [CGuiServer::Process] Opening listening socket for Enigma2 GUI on 127.0.0.1:6767 21:41:25.487451 [CGuiServer::Process] GuiClient 127.0.0.1:37841 connected successful. 21:41:26.039944 [CMainLoop::Cleanup] Removing clients 21:41:26.040118 [CMainLoop::Cleanup] Closing listening socket 21:41:26.040527 [CFlagManager::SetVideoGamma] Gamma not set, using 2.2 since this is default for video 21:41:26.040582 [CMainLoop::Process] Starting grabber.. 21:41:26.040633 [CGrabber::Setup] Lights: 30, Cluster leds: 1 as one led 21:41:26.040664 [CGrabber::Setup] Channels: 90 21:41:26.040696 [CGrabber::Setup] Interval: 0.10 21:41:26.040725 [CGrabber::Run] Mode -> Dynamic 21:41:26.040755 [CGrabber::Run] Framegrabber initialized 21:41:26.040825 [CGrabber::Run] Framegrabber Image initialized 21:41:26.040862 [CGrabber::Run] Blackbar Detection initialized 21:41:26.040892 [CGrabber::Run] Framegrabber set up 21:41:26.040920 [CGrabber::Run] entering grabloop 21:41:26.108365 [CFrameGrabber::CheckRes] Set Scanrange to 120x67 (Source 538976288x538976288) 21:41:27.023086 [CGuiServer::Process] GuiClient 127.0.0.1:37842 connected successful. 21:41:28.030332 [CGuiServer::Process] 127.0.0.1:37841 Connection closed

GUI-Log:

Shell-Script

01:00:28 [D] > __common__::rmFile() > Delete old log file /tmp/enigmalight_gui.log 01:00:28 [D] > __common__::checkSymbolic() 01:00:28 [D] > __init__::Prepare() 01:00:28 [D] > __common__::getBoxInformation() 01:00:28 [D] > __common__::getBoxArch() 01:00:28 [D] > __common__::getBoxArch() > unknown 01:00:28 [D] > __common__::getBoxInformation() > ('VuPlus', 'solo4k', '7376', 'armv7l\n', 'unknown') 01:00:28 [D] > __init__::registerSkinParamsInstance() 01:00:28 [D] > __common__::getXmlContent() 01:00:28 [D] > __common__::checkXmlFile() 01:00:28 [D] > __common__::loadEnigmalightSkin() > Load Skin: /usr/lib/enigma2/python/Plugins/Extensions/EnigmaLight/s$01:00:28 [D] > __common__::registerEnigmalightFonts() 01:00:28 [D] > EL_HttpServer::HttpdStart() 01:00:28 [D] > EL_HttpServer::buildRootTree() 01:00:28 [D] RootController::__init__ 01:00:28 [D] WebController::__init__ 01:00:28 [D] AjaxController::__init__ 01:00:28 [D] ApiController::__init__ 01:00:28 [D] > EL_HttpServer::HttpdStart() -> Enigmalight Webremote started on port: 1414 01:00:28 [D] > EL_HttpServer::BJregisterService() 01:00:29 [D] ELightTimer::setSession 21:41:11 [D] > plugin::sessionstart() 21:41:11 [D] > plugin::EnigmaLight_MainMenu() > MainMenu.. 21:41:11 [D] > plugin::EnigmaLight_MainMenu() > Set Instances.. 21:41:11 [D] EL_Screen_MainMenu::__init__ > Menu Opened succesfull..

pclin · 16. Januar 2021, 10:00

Der Gerätetyp ist nicht richtig eingestellt

Quellcode

[device]
name ambilight
output 192.168.178.27
type udp
port 19446
interval 20000
prefix 41 64 61 00 1d 48
channels 90
rate 500000
debug off

Beschreibung in Post #246 lesen und wie in Screenshot 1 einstellen.

Quellcode

[device]
name WLED
output python /usr/wled_DRGB.py 192.168.xxx.xxx 21324
channels xxx
type popen
interval 200000
debug off

gruß pclin

spanierx · 16. Januar 2021, 11:42

Hab auf WLED UDP gestellt. Neustart. Trotzdem steht wieder Device Ambilight. Wird die conf. nicht überschrieben?

Quellcode

[InitLog] start of log /home/elight-addons/.enigmalight/enigmalight.log [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf [CConfig::CheckConfig] checking config lines [CConfig::CheckConfig] config lines valid [CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf [CConfig::BuildConfig] building config [CConfig::BuildConfig] built config successfully [main] Start device 1 from 1 [CDevice::Process] ambilight: starting with output "python /home/elight-addons/wifilight/wled/wled_DRGB.py 192.168.178.27 21324" [CDevice::Process] ambilight: setting up [CDevice::Process] ambilight: setup succeeded [CEnigmaLight::SetColorSequence]Set colorsequence to RGB set adjust 0 0 0 1[CFlagManager::SetVideoGamma] Gamma not set, using 2.2 since this is default for video [CMainLoop::Process] Starting grabber.. [CGrabber::Setup] Lights: 90, Cluster leds: 1 as one led [CGrabber::Setup] Channels: 270 [CGrabber::Setup] Interval: 0.10 [CGrabber::Run] Mode -> Dynamic [CGrabber::Run] Framegrabber initialized [CGrabber::Run] Framegrabber Image initialized [CGrabber::Run] Blackbar Detection initialized [CGrabber::Run] Framegrabber set up [CGrabber::Run] entering grabloop [CGuiServer::Process] Start GuiServer [CGuiServer::Process] Opening listening socket for Enigma2 GUI on 127.0.0.1:6767 [CFrameGrabber::CheckRes] Set Scanrange to 120x67 (Source 538976288x538976288) [CGuiServer::Process] GuiClient 127.0.0.1:56422 connected successful.