NEW - Der Feed des Merlin Images jetzt bei BoxPirates - NEW

NEW - BoxPirates Plugin Feed - NEW
Unsere Plugins direkt über den Plugin Browser eure Box installierbar

Angepinnt Anleitung:Software & Emu installieren.

    • @petzi1479

      und alle Anderen,

      Newcs scheint ja zu laufen kannst Du mir das da entschlüsseln ?
      Fehlt da ein Selbiger ?

      Kapier nur Bahnhof!

      Danke

      Ausgabe von Putty:


      [ 23:58:53~ # [ 23:58:34 ] [ Loader ] Card 0900 on port /dev/sci0 failed
      sh: missing ]
      ] [ Loader ] Card 0900 on port /dev/sci0 failed
      [ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reinit card with caid 0900
      sh: missing ]
      ] [ Loader ] Reinit card with caid 0900
      [ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
      sh: missing ]
      ] [ Sci ] Closing device /dev/sci0 [Handle=7]
      [ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reader type 5 on node /dev/sci0
      sh: missing ]
      ] [ Loader ] Reader type 5 on node /dev/sci0
      [ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
      sh: missing ]
      ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
      [ 23:58:53~ # [ 23:58:34 ] [ Sci ] Opening device /dev/sci0
      sh: missing ]
      ] [ Sci ] Opening device /dev/sci0
      SCI return~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
      -sh: ed 0 on IOCTL IOCTL_SET_PARAMETERS
      [ 23:58:53SCI: not found
      ~ # [ 23:58:34 ] [ Sci ] resetting card now
      sh: missing ]
      ] [ Sci ] resetting card now
      [ 23:58:53~ # [ 23:58:34 ] [ Sci ] Reset
      sh: missing ]
      ] [ Sci ] Reset
      [ 23:58:53~ # [ 23:58:34 ] [ Sci ] Card reset
      sh: missing ]
      ] [ Sci ] Card reset
      [ 23:58:55~ # [ 23:58:36 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
      sh: missing ]
      ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
      [ 23:58:55~ # [ 23:58:36 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
      1 [01] [00] [11]
      sh: missing ]
      ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
      [ 23:58:55~ # [ 23:58:36 ] [ Loader ] Init NDS card
      sh: missing ]
      ] [ Loader ] Init NDS card
      [ 23:58:59~ # [ 23:58:40 ] [ Loader ] Card 0900 on port /dev/sci0 failed
      sh: missing ]
      ] [ Loader ] Card 0900 on port /dev/sci0 failed~ # [ 23:58:40 ] [ Loader ] Reinit card with caid 0900
      sh: missing ]
      ~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
      sh: missing ]
      ~ # [ 23:58:40 ] [ Loader ] Reader type 5 on node /dev/sci0
      sh: missing ]
      ~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
      sh: missing ]
      ~ # [ 23:58:40 ] [ Sci ] Opening device /dev/sci0
      sh: missing ]
      ~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
      -sh: SCI: not found
      ~ # [ 23:58:40 ] [ Sci ] resetting card now
      sh: missing ]
      ~ # [ 23:58:40 ] [ Sci ] Reset
      sh: missing ]
      ~ # [ 23:58:40 ] [ Sci ] Card reset
      sh: missing ]
      ~ # tuxbox mgcamd v1.33 by mixvt (compiled May 31 2009 19:41:08)
      -sh: syntax error: unexpected "("
      ~ # [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:neutrino:8080:3 Cach
      e:7 Log:2:127.0.0.1:28007 Reread:0
      -sh: [mg]: not found
      ~ # [mg] Ecm cache time: 15
      -sh: [mg]: not found
      ~ # Box type: fortis
      -sh: Box: not found
      ~ # Conax.Key error 2: No such file or directory
      -sh: Conax.Key: not found
      ~ # ~ # [ 23:58:42 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
      -sh: /root: Permission denied
      ~ # [ 23:58:42 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
      1 [01] [00] [11]
      sh: missing ]
      ~ # [ 23:58:42 ] [ Loader ] Init NDS card
      sh: missing ]
      ~ # Keys readed
      -sh: Keys: not found
      ~ # Conax.Key error 2: No such file or directory
      -sh: Conax.Key: not found
      ~ # [config] newcamd route = dummy:localhost:32000 server newcs
      -sh: [config]: not found
      ~ # newcamd keep alive: 300, incoming port: 21000
      -sh: newcamd: not found
      ~ # [mgcam] emm thread started
      -sh: [mgcam]: not found
      ~ # [mgcamd] tps update started.
      -sh: [mgcamd]: not found
      ~ # [mg] loaded 211 keys from /var/keys/tps.bin file
      -sh: [mg]: not found
      ~ # *************************** file changed: /tmp/pmt.tmp
      -sh: bin: not found
      ~ # *************************** CREATE new emu 0 pti 0
      -sh: bin: not found
      ~ # Open Session: PTI2
      -sh: Open: not found
      ~ # stapi_open_session: fd 1 SessionHandle 30110001
      -sh: stapi_open_session:: not found
      ~ # stapi_filter_init: fd 1 handle 30104001
      -sh: stapi_filter_init:: not found
      ~ # stapi_descrambler_init: fd 1 DescramblerHandle 3010800b Session = 30110001
      -sh: stapi_descrambler_init:: not found
      ~ # ************* set pid: TASK=PTI2 fd 1 pid 200 slot 3001802b
      -sh: bin: not found
      ~ # ************* set pid: TASK=PTI2 fd 1 pid 203 slot fc000
      -sh: bin: not found
      ~ # ************* set pid: TASK=PTI2 fd 1 pid 1ff slot 30018024
      -sh: bin: not found
      ~ # [mg0] service 445D index 0 pmt pid 0 (1)
      -sh: syntax error: unexpected "("
      ~ # *************************** START emu 0 pti 0
      -sh: bin: not found
      ~ # [mg0] No supported encryption system found
      -sh: [mg0]: not found
      ~ # [mg0] stopped
      -sh: [mg0]: not found
      ~ # [newcamd] Connecting to localhost:32000...
      -sh: [newcamd]: not found
      ~ # [ 23:58:43 ] [ Newcamd:32000 ] Connection from 127.0.0.1
      sh: missing ]
      ~ # *************************** file changed: /tmp/pmt1_1.tmp
      -sh: bin: not found
      ~ # *************************** CREATE new emu 1 pti
      -sh: bin: not found
      ~ # Open Session: PTI
      -sh: Open: not found
      ~ # stapi_open_session: fd 2 SessionHandle 110001
      -sh: stapi_open_session:: not found
      ~ # stapi_filter_init: fd 2 handle 104001
      -sh: stapi_filter_init:: not found
      ~ # stapi_descrambler_init: fd 2 Descramble
      -sh: stapi_descrambler_init:: not found
      ~ # [mg1] service 445D already started with index 0
      -sh: [mg1]: not found
      ~ # ************* set pid: TASK=PTI fd 2 pi
      -sh: bin: not found
      ~ # ************* set pid: TASK=PTI fd 2 pid 203 slot 180b7
      -sh: bin: not found
      ~ # ************* set pid: TASK=PTI fd 2 pid 1ff slot 180a8
      -sh: bin: not found
      ~ # [mg1] service 445D index 1 pmt pid 0 (2)
      -sh: syntax error: unexpected "("
      ~ # *************************** START emu 1 pti 1
      -sh: bin: not found
      ~ # [ 23:58:43 ] [ Newcamd:32000 ] User dummy lo
      sh: missing ]
      ~ # [newcamd] Login to localho
      -sh: [newcamd]: not found
      ~ # [newcamd] Card data from localh
      -sh: [newcamd]: not found
      ~ # EMM enabled: UA yes SA yes GA yes, Card serial: 0
      -sh: EMM: not found
      ~ # Userid 1 caid 0 providers 1
      -sh: Userid: not found
      ~ # Idents: 000000
      -sh: Idents:: not found
      ~ # ids: 0
      -sh: ids:: not found
      ~ #
      ~ # [mg1] No supported encryption system found
      -sh: [mg1]: not found
      ~ # [mg1] stopped
      -sh: [mg1]: not found
      ~ # [ 23:58:46 ] [ Loader ] Card 0900 on port /dev/sci0 failed
      sh: missing ]
      ~ # [ 23:58:46 ] [ Loader ] Reinit card with caid 0900
      sh: missing ]
      ~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
      sh: missing ]
      ~ # [ 23:58:46 ] [ Loader ] Reader type 5 on node /dev/sci0
      sh: missing ]
      ~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
      sh: missing ]
      ~ # [ 23:58:46 ] [ Sci ] Opening device /dev/sci0
      sh: missing ]
      ~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
      -sh: SCI: not found
      ~ # [ 23:58:46 ] [ Sci ] resetting card now
      sh: missing ]
      ~ # [ 23:58:46 ] [ Sci ] Reset
      sh: missing ]
      ~ # [ 23:58:46 ] [ Sci ] Card reset
      sh: missing ]
      ~ # [ 23:58:48 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
      sh: missing ]
      ~ # [ 23:58:48 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
      1 [01] [00] [11]
      sh: missing ]
      ~ # [ 23:58:48 ] [ Loader ] Init NDS card
      sh: missing ]
      ~ # [ 23:58:53 ] [ Loader ] Card 0900 on port /dev/sci0 failed
      sh: missing ]
      ~ # [ 23:58:53 ] [ Loader ] Reinit card with caid 0900
      sh: missing ]
      ~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
      sh: missing ]
      ~ # [ 23:58:53 ] [ Loader ] Reader type 5 on node /dev/sci0
      sh: missing ]
      ~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
      sh: missing ]
      ~ # [ 23:58:53 ] [ Sci ] Opening device /dev/sci0
      sh: missing ]
      ~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
      -sh: SCI: not found
      ~ # [ 23:58:53 ] [ Sci ] resetting card now
      sh: missing ]
      ~ # [ 23:58:53 ] [ Sci ] Reset
      sh: missing ]
      ~ # [ 23:58:53 ] [ Sci ] Card reset
      sh: missing ]
      ~ # [ 23:58:55 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
      sh: missing ]
      ~ # [ 23:58:55 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
      1 [01] [00] [11]
      sh: missing ]
      ~ # [ 23:58:55 ] [ Loader ] Init NDS card
      sh: missing ]
      ~ # [ 23:58:59 ] [ Loader ] Card 0900 on port /dev/sci0 failed

    • Hallo.

      Ich habe mich auch an die Anleitung gehalten.
      Bei "1018" erscheint übrigens "Interner Kartenleser". Habe ich auch auf "AUS" gestellt.
      "Start" erschien auch.

      Werden automatisch alle vorhandenen Softcams gestartet? Früher bei Neutrino musste man jedes Softcam einzeln starten.

      Gibt es etwas todsicheres zum testen? Der Sat ist egal, ich kann drehen.
      Und wie ist es mit HD+? Karte ist da. Geht das auch? Sie ist aber noch nicht aktiviert.
      Kenne auch niemand mit HD+-fähigem Receiver.

      Danke...

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von Anonymos ()


    • @Petzi

      wozu ,uss ich denn KEys in den Mgcam einspielen. Ich möchte doch die orfinale Karte benutzen.

      Der EMU startet jetzt zwar aber die KArte will nicht laufen :(

      Karte ist V13
      Soft ist die V10786
      EMU aus deinem Link MG vom 25.08.09

      @tommi
      hast du auch die V13?

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von bubuuu ()


    • Original von petzi1479
      1. Schritt:
      Zuesrt die SW vom 18.12.09 mittels USB-Stick installieren -> anschließend auf Werkseinstellungen zurückstellen und eine Settingsliste aufspielen.



      und wie, mal ganz blöd gefragt??

    • Original von king.vitja
      hallo ich würde gerne wissen wo ich die SW vom 18.12.09 herbekomme?


      Warum muß unbediengt die Software vom 18.12.09. sein ??

      Hol Dir die aktuelle Software und gut ist. =>klick mich<=









    • octagon sf 1008

      hallo, ich habe einen octagon sf 1008 und mein problem ist der newcs und mgcam ordner. ich verstehe nicht wo ich meine ganzen daten zb login, passwort, server eintrage. kann mir bitte jemand weiter helfen.

    • RE: Anleitung:Software & Emu installieren.

      Für alle die es etwas einfacher wollen... schaut mal ins Octagon Forum... da gibts die Octa_Mcas... einfach installieren, Karte rein und fertig ist die Sache. Läuft mit Sky S02, V13 und HD+ Karte schwarz und weiß!
      "Eigentlich bin ich ganz anders, ich komm nur so selten dazu!"