@petzi1479
und alle Anderen,
Newcs scheint ja zu laufen kannst Du mir das da entschlüsseln ?
Fehlt da ein Selbiger ?
Kapier nur Bahnhof!
Danke
Ausgabe von Putty:
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
] [ Loader ] Card 0900 on port /dev/sci0 failed
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
] [ Loader ] Reinit card with caid 0900
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
] [ Sci ] Closing device /dev/sci0 [Handle=7]
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
] [ Loader ] Reader type 5 on node /dev/sci0
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
] [ Sci ] Opening device /dev/sci0
SCI return~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: ed 0 on IOCTL IOCTL_SET_PARAMETERS
[ 23:58:53SCI: not found
~ # [ 23:58:34 ] [ Sci ] resetting card now
sh: missing ]
] [ Sci ] resetting card now
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Reset
sh: missing ]
] [ Sci ] Reset
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Card reset
sh: missing ]
] [ Sci ] Card reset
[ 23:58:55~ # [ 23:58:36 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
[ 23:58:55~ # [ 23:58:36 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 23:58:55~ # [ 23:58:36 ] [ Loader ] Init NDS card
sh: missing ]
] [ Loader ] Init NDS card
[ 23:58:59~ # [ 23:58:40 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
] [ Loader ] Card 0900 on port /dev/sci0 failed~ # [ 23:58:40 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:40 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:40 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Card reset
sh: missing ]
~ # tuxbox mgcamd v1.33 by mixvt (compiled May 31 2009 19:41:08)
-sh: syntax error: unexpected "("
~ # [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:neutrino:8080:3 Cach
e:7 Log:2:127.0.0.1:28007 Reread:0
-sh: [mg]: not found
~ # [mg] Ecm cache time: 15
-sh: [mg]: not found
~ # Box type: fortis
-sh: Box: not found
~ # Conax.Key error 2: No such file or directory
-sh: Conax.Key: not found
~ # ~ # [ 23:58:42 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
-sh: /root: Permission denied
~ # [ 23:58:42 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:42 ] [ Loader ] Init NDS card
sh: missing ]
~ # Keys readed
-sh: Keys: not found
~ # Conax.Key error 2: No such file or directory
-sh: Conax.Key: not found
~ # [config] newcamd route = dummy:localhost:32000 server newcs
-sh: [config]: not found
~ # newcamd keep alive: 300, incoming port: 21000
-sh: newcamd: not found
~ # [mgcam] emm thread started
-sh: [mgcam]: not found
~ # [mgcamd] tps update started.
-sh: [mgcamd]: not found
~ # [mg] loaded 211 keys from /var/keys/tps.bin file
-sh: [mg]: not found
~ # *************************** file changed: /tmp/pmt.tmp
-sh: bin: not found
~ # *************************** CREATE new emu 0 pti 0
-sh: bin: not found
~ # Open Session: PTI2
-sh: Open: not found
~ # stapi_open_session: fd 1 SessionHandle 30110001
-sh: stapi_open_session:: not found
~ # stapi_filter_init: fd 1 handle 30104001
-sh: stapi_filter_init:: not found
~ # stapi_descrambler_init: fd 1 DescramblerHandle 3010800b Session = 30110001
-sh: stapi_descrambler_init:: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 200 slot 3001802b
-sh: bin: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 203 slot fc000
-sh: bin: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 1ff slot 30018024
-sh: bin: not found
~ # [mg0] service 445D index 0 pmt pid 0 (1)
-sh: syntax error: unexpected "("
~ # *************************** START emu 0 pti 0
-sh: bin: not found
~ # [mg0] No supported encryption system found
-sh: [mg0]: not found
~ # [mg0] stopped
-sh: [mg0]: not found
~ # [newcamd] Connecting to localhost:32000...
-sh: [newcamd]: not found
~ # [ 23:58:43 ] [ Newcamd:32000 ] Connection from 127.0.0.1
sh: missing ]
~ # *************************** file changed: /tmp/pmt1_1.tmp
-sh: bin: not found
~ # *************************** CREATE new emu 1 pti
-sh: bin: not found
~ # Open Session: PTI
-sh: Open: not found
~ # stapi_open_session: fd 2 SessionHandle 110001
-sh: stapi_open_session:: not found
~ # stapi_filter_init: fd 2 handle 104001
-sh: stapi_filter_init:: not found
~ # stapi_descrambler_init: fd 2 Descramble
-sh: stapi_descrambler_init:: not found
~ # [mg1] service 445D already started with index 0
-sh: [mg1]: not found
~ # ************* set pid: TASK=PTI fd 2 pi
-sh: bin: not found
~ # ************* set pid: TASK=PTI fd 2 pid 203 slot 180b7
-sh: bin: not found
~ # ************* set pid: TASK=PTI fd 2 pid 1ff slot 180a8
-sh: bin: not found
~ # [mg1] service 445D index 1 pmt pid 0 (2)
-sh: syntax error: unexpected "("
~ # *************************** START emu 1 pti 1
-sh: bin: not found
~ # [ 23:58:43 ] [ Newcamd:32000 ] User dummy lo
sh: missing ]
~ # [newcamd] Login to localho
-sh: [newcamd]: not found
~ # [newcamd] Card data from localh
-sh: [newcamd]: not found
~ # EMM enabled: UA yes SA yes GA yes, Card serial: 0
-sh: EMM: not found
~ # Userid 1 caid 0 providers 1
-sh: Userid: not found
~ # Idents: 000000
-sh: Idents:: not found
~ # ids: 0
-sh: ids:: not found
~ #
~ # [mg1] No supported encryption system found
-sh: [mg1]: not found
~ # [mg1] stopped
-sh: [mg1]: not found
~ # [ 23:58:46 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
~ # [ 23:58:46 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:46 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:46 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Card reset
sh: missing ]
~ # [ 23:58:48 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
~ # [ 23:58:48 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:48 ] [ Loader ] Init NDS card
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:53 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Card reset
sh: missing ]
~ # [ 23:58:55 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
~ # [ 23:58:55 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:55 ] [ Loader ] Init NDS card
sh: missing ]
~ # [ 23:58:59 ] [ Loader ] Card 0900 on port /dev/sci0 failed
und alle Anderen,
Newcs scheint ja zu laufen kannst Du mir das da entschlüsseln ?
Fehlt da ein Selbiger ?
Kapier nur Bahnhof!
Danke
Ausgabe von Putty:
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
] [ Loader ] Card 0900 on port /dev/sci0 failed
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
] [ Loader ] Reinit card with caid 0900
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
] [ Sci ] Closing device /dev/sci0 [Handle=7]
[ 23:58:53~ # [ 23:58:34 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
] [ Loader ] Reader type 5 on node /dev/sci0
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
] [ Sci ] Opening device /dev/sci0
SCI return~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: ed 0 on IOCTL IOCTL_SET_PARAMETERS
[ 23:58:53SCI: not found
~ # [ 23:58:34 ] [ Sci ] resetting card now
sh: missing ]
] [ Sci ] resetting card now
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Reset
sh: missing ]
] [ Sci ] Reset
[ 23:58:53~ # [ 23:58:34 ] [ Sci ] Card reset
sh: missing ]
] [ Sci ] Card reset
[ 23:58:55~ # [ 23:58:36 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
[ 23:58:55~ # [ 23:58:36 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P 1 [01] [00] [11]
[ 23:58:55~ # [ 23:58:36 ] [ Loader ] Init NDS card
sh: missing ]
] [ Loader ] Init NDS card
[ 23:58:59~ # [ 23:58:40 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
] [ Loader ] Card 0900 on port /dev/sci0 failed~ # [ 23:58:40 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:40 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:40 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:40 ] [ Sci ] Card reset
sh: missing ]
~ # tuxbox mgcamd v1.33 by mixvt (compiled May 31 2009 19:41:08)
-sh: syntax error: unexpected "("
~ # [mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:neutrino:8080:3 Cach
e:7 Log:2:127.0.0.1:28007 Reread:0
-sh: [mg]: not found
~ # [mg] Ecm cache time: 15
-sh: [mg]: not found
~ # Box type: fortis
-sh: Box: not found
~ # Conax.Key error 2: No such file or directory
-sh: Conax.Key: not found
~ # ~ # [ 23:58:42 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
-sh: /root: Permission denied
~ # [ 23:58:42 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:42 ] [ Loader ] Init NDS card
sh: missing ]
~ # Keys readed
-sh: Keys: not found
~ # Conax.Key error 2: No such file or directory
-sh: Conax.Key: not found
~ # [config] newcamd route = dummy:localhost:32000 server newcs
-sh: [config]: not found
~ # newcamd keep alive: 300, incoming port: 21000
-sh: newcamd: not found
~ # [mgcam] emm thread started
-sh: [mgcam]: not found
~ # [mgcamd] tps update started.
-sh: [mgcamd]: not found
~ # [mg] loaded 211 keys from /var/keys/tps.bin file
-sh: [mg]: not found
~ # *************************** file changed: /tmp/pmt.tmp
-sh: bin: not found
~ # *************************** CREATE new emu 0 pti 0
-sh: bin: not found
~ # Open Session: PTI2
-sh: Open: not found
~ # stapi_open_session: fd 1 SessionHandle 30110001
-sh: stapi_open_session:: not found
~ # stapi_filter_init: fd 1 handle 30104001
-sh: stapi_filter_init:: not found
~ # stapi_descrambler_init: fd 1 DescramblerHandle 3010800b Session = 30110001
-sh: stapi_descrambler_init:: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 200 slot 3001802b
-sh: bin: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 203 slot fc000
-sh: bin: not found
~ # ************* set pid: TASK=PTI2 fd 1 pid 1ff slot 30018024
-sh: bin: not found
~ # [mg0] service 445D index 0 pmt pid 0 (1)
-sh: syntax error: unexpected "("
~ # *************************** START emu 0 pti 0
-sh: bin: not found
~ # [mg0] No supported encryption system found
-sh: [mg0]: not found
~ # [mg0] stopped
-sh: [mg0]: not found
~ # [newcamd] Connecting to localhost:32000...
-sh: [newcamd]: not found
~ # [ 23:58:43 ] [ Newcamd:32000 ] Connection from 127.0.0.1
sh: missing ]
~ # *************************** file changed: /tmp/pmt1_1.tmp
-sh: bin: not found
~ # *************************** CREATE new emu 1 pti
-sh: bin: not found
~ # Open Session: PTI
-sh: Open: not found
~ # stapi_open_session: fd 2 SessionHandle 110001
-sh: stapi_open_session:: not found
~ # stapi_filter_init: fd 2 handle 104001
-sh: stapi_filter_init:: not found
~ # stapi_descrambler_init: fd 2 Descramble
-sh: stapi_descrambler_init:: not found
~ # [mg1] service 445D already started with index 0
-sh: [mg1]: not found
~ # ************* set pid: TASK=PTI fd 2 pi
-sh: bin: not found
~ # ************* set pid: TASK=PTI fd 2 pid 203 slot 180b7
-sh: bin: not found
~ # ************* set pid: TASK=PTI fd 2 pid 1ff slot 180a8
-sh: bin: not found
~ # [mg1] service 445D index 1 pmt pid 0 (2)
-sh: syntax error: unexpected "("
~ # *************************** START emu 1 pti 1
-sh: bin: not found
~ # [ 23:58:43 ] [ Newcamd:32000 ] User dummy lo
sh: missing ]
~ # [newcamd] Login to localho
-sh: [newcamd]: not found
~ # [newcamd] Card data from localh
-sh: [newcamd]: not found
~ # EMM enabled: UA yes SA yes GA yes, Card serial: 0
-sh: EMM: not found
~ # Userid 1 caid 0 providers 1
-sh: Userid: not found
~ # Idents: 000000
-sh: Idents:: not found
~ # ids: 0
-sh: ids:: not found
~ #
~ # [mg1] No supported encryption system found
-sh: [mg1]: not found
~ # [mg1] stopped
-sh: [mg1]: not found
~ # [ 23:58:46 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
~ # [ 23:58:46 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:46 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:46 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:46 ] [ Sci ] Card reset
sh: missing ]
~ # [ 23:58:48 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
~ # [ 23:58:48 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:48 ] [ Loader ] Init NDS card
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Card 0900 on port /dev/sci0 failed
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Reinit card with caid 0900
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=7]
sh: missing ]
~ # [ 23:58:53 ] [ Loader ] Reader type 5 on node /dev/sci0
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Opening device /dev/sci0
sh: missing ]
~ # SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
-sh: SCI: not found
~ # [ 23:58:53 ] [ Sci ] resetting card now
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Reset
sh: missing ]
~ # [ 23:58:53 ] [ Sci ] Card reset
sh: missing ]
~ # [ 23:58:55 ] [ ATR ] T=0 1etu=372.00us Guardtime:15etu WWT:9600etu
sh: missing ]
~ # [ 23:58:55 ] [ ATR ] Historical bytes: A [B0] [07] i [FF] J P p [00] [00] P
1 [01] [00] [11]
sh: missing ]
~ # [ 23:58:55 ] [ Loader ] Init NDS card
sh: missing ]
~ # [ 23:58:59 ] [ Loader ] Card 0900 on port /dev/sci0 failed