NEW - Der Feed des Merlin Images jetzt bei BoxPirates - NEW

NEW - BoxPirates Plugin Feed - NEW
Unsere Plugins direkt über den Plugin Browser eure Box installierbar

Angepinnt Update Software From Receiver Menu

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Update Software From Receiver Menu

    To update Set Top Box from Menu, you should go to Menu (Press button Home) and go to
    Settings > System Information menu
    1) Internet
    You can update the firmware through the Internet.
    1) Make sure that the digital receiver is connected to the internet before running the firmware
    upgrade.
    2) Press the OK button, and the Update List will be shown.
    3) Select the software that you want to install.
    4) After finish the download of new software, the receiver will be rebooted automatically to
    upgrade your firmware.
    5) Please wait for the installation.
    6) After installation, the receiver will be rebooted again. Now you can use the receiver with
    upgraded version.
    !!!! IN ANY CASE POWER OFF OR REBOOT DURING THE UPDATE PROCESS!!!!
    2) Using a USB Storage
    If you have a USB memory stick, you can update the firmware from it by performing the
    following steps:
    1) Download a new firmware from the Azbox web site. (Format of software should be
    patch.bin)
    2) Copy the firmware file to your USB memory stick.
    3) Insert the USB memory stick into the USB port of the digital receiver.
    4) Select the Settings > System Information > Firmware Upgrade menu, then the files in the
    USB memory are listed.
    5) Place the highlight bar on the right firmware version and press the OK button.
    6) The receiver will be rebooted automatically to upgrade your firmware.
    7) Please wait for the installation.
    After installation, the receiver will be rebooted again.
    Now you can use the receiver with upgraded version.
    !!!! IN ANY CASE POWER OFF OR REBOOT DURING THE UPDATE PROCESS!!!!
    ------------------------------------------------------------------------------------------------------------------------
    -----------------------------
    IMPORTANT NOTE
    Your USB memory must be formatted in the FAT file system. Otherwise, the digital receiver
    cannot recognize your USB memory. In addition, the digital receiver can only recognize files
    and directories which are named with only alphabetic, numeric and underscore letters. If
    there is a file or folder named with other letters, the digital receiver cannot recognize not only
    it but also its subsequent files and folders.





    Dream 7020 HD Newnigma2 Snapshot
    Dream 800 HD se Newnigma2 Snapshot
    Dream 500 HD Newnigma2 Snapshot
    Dream 7025 Newnigma2 Snapshot