NEW - Der Feed des Merlin Images jetzt bei BoxPirates - NEW

NEW - BoxPirates Plugin Feed - NEW
Unsere Plugins direkt über den Plugin Browser eure Box installierbar

Fehler bei Image flashen

    • Fehler bei Image flashen

      Hallo,

      Dreambox Two ist da. Jetzt wollte ich das Test-Nobody-IMage flashen.
      Aber beim schreiben erscheint dieser Fehler:

      Dieser Spoiler ist nur für Mitglieder sichtbar! - Um den Spoiler nutzen zu können Loggen Sie sich bitte ein oder Registrieren Sie sich.






      Was ist das und was muss ich machen ?

      GRuß
      GQ75QN95A, Denon X2200, Teufel Theater 80 mit 7.1 FH, VU+ Ultimo 4K, PS5, NVIDIA Shield Pro 2017, Dreambox Two

    • auf eine dreamboxTWO flasht man nur Images auf Dream-OS-Basis mit OE2.6.
      Bei andern Images machste aus deine Box schnell einen Fall für die Einschickung zur Reperatur und im schlimmsten Fall wirds ein Briefbeschwerer.
      Das sind alles Bastelimages wie dein erwähntes mit keiner vollständigern Treiberunterstützung, da nicht gegebene Unterstützung von Dreamproberty.

    • Bitte etwas Geduld, der Fehler ist bekannt, ich tausche gleich die Anhänge, dann nochmal laden.
      Ich sage Bescheid wenn die aktuellen Files oben sind
      Kein support für Internet-Sharing!
      und kein Support per PM (Fragen bitte ins Forum)

      Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen

    • achso - so ein "verwurschteltes" orginal mit eingebauten gp4 ... Wahrscheinlich läßt es sich deswegen nicht flashen.
      nehm das orginale und installiere dir das gp4-plugin nach Anleitung der IHAD-Wiki

    • @dogfight76

      Habe alle Nobody Images mit der aktuellen Version neu hochgeladen.
      Bitte nochmals laden, dann sollte das flashen funktionieren.

      GP4.1 Nobody Basis + Test Image [Für die DM 520/ 820 / 900 / 920 / 7080 / One + Two]
      Kein support für Internet-Sharing!
      und kein Support per PM (Fragen bitte ins Forum)

      Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen

    • @Anz

      Da bei meiner Two ja einige Sachen (wie z.b. Netzwerkbrowser) nicht funktinierten habe ich jetzt versucht nochmal das IMage zu flashen:

      Quellcode

      1. gp4.1-test-nobody-image-dreamtwo-20211219191216.tar.xz
      Aber es kommt dann wieder die Fehlermeldung:
      [*] Remounting '/dev/dreambox-data' to '/data'[*] Creating ext4 filesystem 'dreambox-rootfs' on /dev/dreambox-rootfsmke2fs 1.43.4 (31-Jan-2017)Discarding device blocks: 4096/1048576 done Creating filesystem with 1048576 4k blocks and 262144 inodesFilesystem UUID: 7c53bbdd-17c0-4614-ada4-bef6e752c8f0Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736Allocating group tables: 0/32 done Writing inode tables: 0/32 done Creating journal (16384 blocks): doneWriting superblocks and filesystem accounting information: 0/32 done[*] Mounting '/dev/dreambox-rootfs' to '/mnt'[*] Extracting '/tmp/tQOtWt' to '/mnt'tar: corrupted datatar: short readFatal: Failed to extract root filesystem[*] Unmounting '/mnt'


      Und jetzt ?
      GQ75QN95A, Denon X2200, Teufel Theater 80 mit 7.1 FH, VU+ Ultimo 4K, PS5, NVIDIA Shield Pro 2017, Dreambox Two

    • Ich kann es leider aktuell nicht testen, da ich bis morgen Abend nicht zuhause bin.
      Ich würde dir jetzt raten das original Image zu flashen und anschließend das GP4 Separat zu installieren.
      Ist ein bisschen mehr Aufwand, hält sich aber immer noch in Grenzen.

      Original Dream Image

      dreamboxupdate.com/opendreambo…images/dreamtwo/index.php


      GP4

      wiki.blue-panel.com/index.php/GP4_Installation

      Und wenn auch benötigt, noch den Camfeed

      gp4-cam-feed
      Kein support für Internet-Sharing!
      und kein Support per PM (Fragen bitte ins Forum)

      Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen

    • Auch das hier im Board vorhandene image ist in Ordnung. Könnte ohne weiteres installieren.

      Quellcode

      1. gp4.1-test-nobody-image-dreamtwo-20211219191216.tar.xz


      [*] Remounting '/dev/dreambox-data' to '/data'[*] Creating ext4 filesystem 'dreambox-rootfs' on /dev/dreambox-rootfsmke2fs 1.43.4 (31-Jan-2017)Discarding device blocks: 4096/1048576 528384/1048576 done Creating filesystem with 1048576 4k blocks and 262144 inodesFilesystem UUID: ead8e200-489e-4179-8dae-0a955857626bSuperblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736Allocating group tables: 0/32 done Writing inode tables: 0/32 done Creating journal (16384 blocks): doneWriting superblocks and filesystem accounting information: 0/32 done[*] Mounting '/dev/dreambox-rootfs' to '/mnt'[*] Extracting '/tmp/lMhDZb' to '/mnt'[*] Mounting '/dev' to '/mnt/dev'[*] Mounting '/proc' to '/mnt/proc'[*] Mounting '/run' to '/mnt/run'[*] Mounting '/sys' to '/mnt/sys'[*] Mounting '/tmp' to '/mnt/tmp'Image Name: autoexecCreated: Mon May 18 18:19:41 2020Image Type: AArch64 Linux Script (uncompressed)Data Size: 621 Bytes = 0.61 kB = 0.00 MBLoad Address: 00000000Entry Point: 00000000Contents: Image 0: 613 Bytes = 0.60 kB = 0.00 MB[*] Creating boot image[*] Writing bootblob.bin to /dev/boot164+1 records in164+1 records out10776576 bytes (11 MB, 10 MiB) copied, 0.374055 s, 28.8 MB/s[*] Unmounting '/mnt/dev'[*] Unmounting '/mnt/proc'[*] Unmounting '/mnt/run'[*] Unmounting '/mnt/sys'[*] Unmounting '/mnt/tmp'[*] Unmounting '/mnt'[*] Unmounting '/data'[*] Finished successfully. You may reboot now.




    • fly-tox schrieb:

      Auch das hier im Board vorhandene image ist in Ordnung. Könnte ohne weiteres installieren.

      Quellcode

      1. gp4.1-test-nobody-image-dreamtwo-20211219191216.tar.xz
      Das hat jetzt funktioniert.

      Jetzt das VOD-PLugin installieren, reboot, und dann die einzelnen VOD-Addons installieren ?
      Also Netflix und Disney+ benötige ich
      GQ75QN95A, Denon X2200, Teufel Theater 80 mit 7.1 FH, VU+ Ultimo 4K, PS5, NVIDIA Shield Pro 2017, Dreambox Two

    • Wenn du NetflixDream oder DisneyDream nutzen möchtest, musst du eines über den weget Installer installieren.
      Oder du hast schon ein anderes Plugin wie PlexDream installiert, dann findest du schon alle Plugins im Addon Browser.

    • murxer schrieb:

      Wenn du NetflixDream oder DisneyDream nutzen möchtest, musst du eines über den weget Installer installieren.
      Sprich Plugins aus unserem Board werden über Telnet mit dem wget Befehl im jeweiligem Plugin Thread installiert.
      Vorteil dabei ist das diese somit auch Updatefähig sind und du immer auf dem aktuellem Stand bist, was ein Image Feed nicht immer ist.
      Kein support für Internet-Sharing!
      und kein Support per PM (Fragen bitte ins Forum)

      Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen