NEW - Der Feed des Merlin Images jetzt bei BoxPirates - NEW

NEW - BoxPirates Plugin Feed - NEW
Unsere Plugins direkt über den Plugin Browser eure Box installierbar

Hyperion (ng) arm64

    • Super Bild jetzt in der LED-Visualisierung

      Aber Leds flackern immer noch unkontrolliert. Kann ja eigentlich nur noch am ESP liegen. oder ?

      LG
      Dateien
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

    • @spanierx
      Hast du an die Datenleitung eine Vorschaltwiderstand und ein Zusatz Elko wie empfohlen wird?
      Gruß satdx62
      Dateien

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von satdx62 ()


    • Vorschaltwiderstand und Elko sind Optional und nicht empfohlen!
      Wird auch meistens nicht benötigt, meine 6 ESP8266 laufen alle ohne Wiederstand, Elko oder Level Shifter problemlos.

      470 Ohm ist auch zu viel.
      Aktuelles Schaltbild aus dem WLED-Wiki im Anhang.

      @spanierx
      4,95 Volt hast du unter Last eingestellt.

      Der Grabber arbeitet jetzt stabil?
      Wie wird der ESP versorgt?
      Welchen ESP verwendest du?
      Wieviele LED's?
      Sind die Verbindungen gelötet?
      Hast du noch LED's übrig?
      Wenn ja würde ich damit gegen testen.

      gruß pclin
      Dateien
      • WLED-Wire.jpeg

        (44,31 kB, 15 mal heruntergeladen, zuletzt: )
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • @satdx62
      ich verwende keinen Vorschaltwiderstand

      @pclin
      4,95 Volt habe ich unter Last eingestellt
      das Livevideo läuft zumindestens in der Visualisierung perfekt
      der ESP wird jetz über den USB des TV versorgt
      ich verwende einen ESP8266 / ESP12F Doiting und verbaue gerade einen neuen ESP8266mod
      verwende 233LED`s
      die Verbindungen sind alle gelötet
      Hab noch LEDS aber hab gerade neue angebracht im Glauben das es hilft

      LG

      edit: hab jetzt den ESP8266mod dran und bin nah dran! Die USB Buchse am TV lieferte zu wenig Ampere !!!!!!!!!!!!
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von spanierx ()


    • sieht schon ganz gut aus !

      nun gehts weiter wie in Post 5

      THX @pclin
      Dateien
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von spanierx ()


    • Paket hostname in Post #1 hinzugefügt.

      gruß pclin
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • zu Post 5

      Es ist alles getan ! und läuft !

      Jetzt muss ich nur noch die Chefin zu einer weissen Wand hinterm TV überreden. Momentan grau.

      Wozu dient das Paket hostname eigentlich? Oder was ändert sich?

      LG
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

    • Hyperion verwendet hostname -I, dadurch das busybox das nicht kennt kommt es zu einer Fehler Meldung, und hyperion bekommt dafür keine Daten (IP), und man findet das im log.
      Was dadurch evtl. nicht geht kann ich nicht sagen, mir ist es aber lieber wenn alles sauber läuft. ;)
      Beim dreamOS funktioniert alles wie gewohnt, das habe ich getestet.

      gruß pclin
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • ich weiß nicht mal was "busybox" ist . Oder wozu man das braucht. Lese mal nach.

      LG
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

    • Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • kann da zwar nicht ganz folgen auf die Schnelle , Aber mein neues Multimeter deutet auf sowas hin .

      LG
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

    • Mit Multimeter hat das nichts zutun!

      busybox ist wie ein Schweitzer Taschenmesser nur für Linux Befehle.
      Benötigt man aber einen vollwertigen Schraubendreher, nimmt man diesen und nicht das Schweitzer Taschenmesser.

      Quellcode

      1. root@dreamtwo:~$ busybox --help
      2. BusyBox v1.24.1 (2019-05-27 19:36:38 CEST) multi-call binary.
      3. BusyBox is copyrighted by many authors between 1998-2015.
      4. Licensed under GPLv2. See source distribution for detailed
      5. copyright notices.
      6. Usage: busybox [function [arguments]...]
      7. or: busybox --list
      8. or: function [arguments]...
      9. BusyBox is a multi-call binary that combines many common Unix
      10. utilities into a single executable. Most people will create a
      11. link to busybox for each function they wish to use and BusyBox
      12. will act like whatever it was invoked as.
      13. Currently defined functions:
      14. [, [[, addgroup, adduser, arp, ash, awk, base64, basename, bash, blkid, brctl, bunzip2, bzcat, bzip2, cat, chgrp, chmod, chown, chroot, chvt, clear, cmp, cp, cpio, crond, cut, date, dc, dd, deallocvt, delgroup, deluser, df, diff,
      15. dirname, dmesg, dnsdomainname, dos2unix, du, dumpkmap, echo, egrep, eject, env, ether-wake, expr, false, fbset, fdisk, fgrep, find, flock, fstrim, getopt, getty, grep, groups, gunzip, gzip, hd, head, hexdump, hostname, id,
      16. ifconfig, ifdown, ifup, inotifyd, ionice, ip, klogd, less, ln, loadfont, loadkmap, logger, logname, losetup, ls, lspci, lsusb, lzcat, lzma, lzop, lzopcat, md5sum, mesg, microcom, mkdir, mkdosfs, mkfifo, mkfs.vfat, mknod, mkswap,
      17. mktemp, more, mountpoint, mv, nc, netstat, nice, nohup, nslookup, od, openvt, patch, pidof, printf, pwd, rdate, readahead, readlink, realpath, renice, reset, resize, rfkill, rm, rmdir, route, run-parts, sed, seq, setconsole,
      18. setsid, sh, sha1sum, sha256sum, sha512sum, shuf, sleep, sort, start-stop-daemon, stat, strings, stty, sulogin, swapoff, swapon, switch_root, sync, syslogd, tail, tar, taskset, tee, telnet, telnetd, test, tftp, time, timeout,
      19. touch, tr, true, tty, tunctl, udhcpc, umount, uname, uncompress, uniq, unix2dos, unlink, unlzma, unlzop, unxz, unzip, users, usleep, vconfig, vi, wc, wget, which, who, whoami, xargs, xz, xzcat, yes, zcat
      Alles anzeigen
      gruß pclin
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • Quellcode

      1. root@dreamtwo:~$ busybox hostname --help
      2. BusyBox v1.24.1 (2019-05-27 19:36:38 CEST) multi-call binary.
      3. Usage: hostname [OPTIONS] [HOSTNAME | -F FILE]
      4. Get or set hostname or DNS domain name
      5. -s Short
      6. -i Addresses for the hostname
      7. -d DNS domain name
      8. -f Fully qualified domain name
      9. -F FILE Use FILE's content as hostname
      Alles anzeigen

      Quellcode

      1. root@dreamtwo:~$ hostname --help
      2. Usage: hostname [-b] {hostname|-F file} set host name (from file)
      3. hostname [-a|-A|-d|-f|-i|-I|-s|-y] display formatted name
      4. hostname display host name
      5. {yp,nis,}domainname {nisdomain|-F file} set NIS domain name (from file)
      6. {yp,nis,}domainname display NIS domain name
      7. dnsdomainname display dns domain name
      8. hostname -V|--version|-h|--help print info and exit
      9. Program name:
      10. {yp,nis,}domainname=hostname -y
      11. dnsdomainname=hostname -d
      12. Program options:
      13. -a, --alias alias names
      14. -A, --all-fqdns all long host names (FQDNs)
      15. -b, --boot set default hostname if none available
      16. -d, --domain DNS domain name
      17. -f, --fqdn, --long long host name (FQDN)
      18. -F, --file read host name or NIS domain name from given file
      19. -i, --ip-address addresses for the host name
      20. -I, --all-ip-addresses all addresses for the host
      21. -s, --short short host name
      22. -y, --yp, --nis NIS/YP domain name
      23. Description:
      24. This command can get or set the host name or the NIS domain name. You can
      25. also get the DNS domain or the FQDN (fully qualified domain name).
      26. Unless you are using bind or NIS for host lookups you can change the
      27. FQDN (Fully Qualified Domain Name) and the DNS domain name (which is
      28. part of the FQDN) in the /etc/hosts file.
      Alles anzeigen
      gruß pclin
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • bin doof , aber erfolgreich ... lach


      Richtig! du bringst mir ein Lächeln ins Gesicht , was ist ein vollwertiger Schraubendreher?

      Wenn du mir sagst was das Paket hostname an Vorteile/Schritte bringt, bin ich dabei

      LG
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von spanierx ()


    • Post #48 lesen.

      gruß pclin
      Dateien
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • schon mindestens fünfmal.. hier läufts bestens. war gerade schauen

      LG
      Dateien
      • foto.jpg

        (2,01 MB, 14 mal heruntergeladen, zuletzt: )
      LG-TV/ PICCAP/Hyperion(NG)/ ESP8266 / 2x 230 LED SK6812NW

      :thumbsup: AMBILIGHT-FAN :thumbsup:

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von spanierx ()


    • hi, jsut to report. it is working fine with android hyperion grabber on Sony androidTV and adalight leds.
      any update on internal amlogic grabber that is not working at the moment?


      2022-01-16T22:11:39.025Z [ DAEMON] (INFO) CEC handler created
      2022-01-16T22:11:39.032Z [ EFFECTFILES] (INFO) 40 effects loaded from directory :/effects/
      2022-01-16T22:11:39.034Z [ EFFECTFILES] (INFO) 22 effect schemas loaded from directory :/effects/schema/
      2022-01-16T22:11:39.1035Z [ EFFECTFILES] (INFO) 0 effects loaded from directory /root/.hyperion/custom-effects/
      2022-01-16T22:11:39.054Z [ SETTINGSMGR] (DEBUG) (SettingsManager.cpp:186:SettingsManager()) Settings database initialized
      2022-01-16T22:11:39.056Z [ BLACKBORDER] (DEBUG) ( BlackBorderProcessor.cpp:64:handleSettingsUpdate()) Set mode to: default
      2022-01-16T22:11:39.056Z [ COMPONENTREG] (DEBUG) (ComponentRegister.cpp:41:setNewComponentState()) Blackborder detector: enabled
      2022-01-16T22:11:39.089Z [ DAEMON] (ERROR) grabber device '/dev/amvideocap0' for type amlogic not found!
      2022-01-16T22:11:39.089Z [ DAEMON] (INFO) set screen capture device to 'amlogic'
      2022-01-16T22:11:39.089Z [ AMLOGICGRABBER] (INFO) Set image size decimation to 10
      2022-01-16T22:11:39.089Z [ FRAMEBUFFERGRABBER] (INFO) Set image size decimation to 10
      2022-01-16T22:11:39.089Z [ DAEMON ] (INFO) AMLOGIC grabber created
      2022-01-16T22:11:39.090Z [ DAEMON] (DEBUG) (hyperiond.cpp:608:handleSettingsUpdate())
      V4L2 grabber created 2022-01-16T22:11:39.093Z [ JSONSERVER] (DEBUG) (JsonServer.cpp:28: JsonServer()) Created instance

    • This version is not made for Dreamboxes, so the amlogic grabber doesn't work either.
      So you can only use external grabbers.
      It is not yet possible to say when there will be a Dreambox version, it is being worked on.

      Thanks for your feedback.

      regards pclin
      Dreambox ONE / TWO, DM920UHD, DM900UHD, DM820HD HDD + USB-HUB, Stick 64GB, USB-HDD, Wireless Touch Keyboard K400r, Wlan-Stick 11n
      ONE (Flash) DP-OE2.6 (@) eigenes OE2.6, Debian-Bullseye | TWO (Flash) DP-OE2.6 (BAXII) eigenes OE2.6, Debian-Buster, Diverse
      (Flash) DP-OE2.5 (BAXII) eigenes OE2.5-e2+kodi+X, debian-stretch, Diverse
      AudioDSP: miniDSP 2x4HD
      TV: LG OLED65BX9LB (PicCap)
      Hyperion und Plugin HyperionControl auf der Dreambox ONE | TWO
      ESP32 mit WLED Wlan 263 LED's SK6812-RGBW-NW 60 LED/m



      Ambilight for ever

    • nrpetonr schrieb:

      happy to contribute...
      i do not necessarily need hyperion.ng, any solution to have both, amlogic grabber and external android TV grabber, working? e.g. hyperion control from enigma2-plugin-extendions?
      sorry @pclin, i searched meanwhile and found the answer in your other forums. i will ask there for specific problems i have with my setup. still, after experience with hyperion.ng, i would say it is really new generation :) how may i help to make internal aml grabber work with hyperion.ng?