Haenline Software Devilcards SAT Shop


... neuer Forenbereich - Amazon Echo / Amazon Echo Dot - Interessant? - ... dann schaut mal rein. -> Klick


Problem mit Boxpirates Plugin und HD02 Karte

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Problem mit Boxpirates Plugin und HD02 Karte

      Hallo,
      da mir nun die V14 ins Haus geflattert ist, habe ich ich das Boxpirates Plugin installiert, mit oscam oe2.0 10037 und config für V14+HD02.
      Dann Boxkey und RSAkey eingetragen. Erst einmal die HD02 ins untere Einschub rein. Leider bleibt alles dunkel. Im Webinterface steht bei Status OFF und no entitlements. Bin etwas ratlos. Was läuft da falsch?
      ich habe DM8000 mit Newnigma drauf.

    • Also die hd+ Karte kommt bei der 8000er oben rein und die v14 unten...
      Aber wie das @Just Me schon schrieb wird wohl nix werden mit der v14 oder du hast Riesen Glück...
      Probieren geht über studieren

      Und Klick bitte mal in meiner Signatur

      An alle User
      Gruß Reiter


      Fragen gehören ins Forum und nicht in mein Postfach

      VU+ Forum -- Box - Pirates
      EMM von Hand schreiben
      V14 + HD02 mit Easymouse am RaspiServer





    • Lies mal was ich geschrieben habe...
      Gruß Reiter


      Fragen gehören ins Forum und nicht in mein Postfach

      VU+ Forum -- Box - Pirates
      EMM von Hand schreiben
      V14 + HD02 mit Easymouse am RaspiServer





    • Habe etwas von dem gelesen, was du geschrieben hast. Weiss aber nicht worauf du anspielst. Vielleicht kannst du mir auf die Sprünge helfen.
      Die HD02 ist jetzt im oberen Schacht. Im Webinterface steht jetzt bei der Hd02 Error. Bei der V14 steht jetzt OFF.
      Die HD02 funktioniert. Habe es in einem anderen Receiver gerade noch mal überprüft.

    • wie wäre es den mal mit deinen configs...in einem spoiler.. ne glaskugel haben wir noch nicht... :D
      Gruß Reiter


      Fragen gehören ins Forum und nicht in mein Postfach

      VU+ Forum -- Box - Pirates
      EMM von Hand schreiben
      V14 + HD02 mit Easymouse am RaspiServer





    • Na klar doch.

      [reader]
      label = skyV14
      protocol = internal
      device = /dev/sci0
      caid = 098C
      boxid = 12345678
      ins7e11 = 14
      fix07 = 1
      detect = cd
      autospeed = 1
      cardmhz = 2700
      group = 1
      emmcache = 1,3,14
      blockemm-unknown = 1
      blockemm-s = 1
      blockemm-g = 1
      blockemm-bylen = 1-255
      saveemm-u = 1
      saveemm-unknown = 1

      [reader]
      label = hdplus02
      protocol = internal
      device = /dev/sci1
      caid = 1843
      rsakey = BF3xxxxxx...xxxxD5 # lässt
      boxkey = A76xxx..xx37C #16 stelliger boxkey, lässt sich ebenfalls leicht per google finden (Achtung es darf kein Leerzeichen drinne sein)
      detect = cd
      ecmwhitelist = 1843:89
      autospeed = 1
      cardmhz = 2700
      ident = 1843:000000,003411,008011
      group = 2
      emmcache = 1,3,2
      auprovid = 003411

      habe ausser Boxkey und RSAkey nichts verändert.

    • 2015/08/13 23:23:25 06F9C11F r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
      2015/08/13 23:23:25 06F9C11F r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      2015/08/13 23:23:25 06F9C11F r (reader) hdplus02 [internal] card system not supported
      2015/08/13 23:23:25 06F9C11F r (reader) hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
      2015/08/13 23:23:27 06F9C11F r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      2015/08/13 23:23:27 06F9C11F r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      2015/08/13 23:23:27 06F9C11F r (reader) hdplus02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
      2015/08/13 23:23:27 06F9C11F r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75192
      2015/08/13 23:23:27 06F9C11F r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
      2015/08/13 23:23:29 06F9C11F r (reader) hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
      2015/08/13 23:23:30 06F9C11F r (reader) hdplus02 [internal] detect native nagra card
      2015/08/13 23:23:31 06F9C11F r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
      2015/08/13 23:23:33 06F9C11F r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
      2015/08/13 23:23:34 06F9C11F r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      2015/08/13 23:23:34 06F9C11F r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      2015/08/13 23:23:34 06F9C11F r (reader) hdplus02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
      2015/08/13 23:23:34 06F9C11F r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75211
      2015/08/13 23:23:35 06F9C11F r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
      2015/08/13 23:23:35 06F9C11F r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      2015/08/13 23:23:37 06F9C11F r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
      2015/08/13 23:23:38 06F9C11F r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75251
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] card system not supported
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
      2015/08/13 23:23:40 06F9C11F r (reader) hdplus02 [internal] card initializing error

    • Hmm probiere mal bitte folgende Config für die HD02 Karte:

      [reader]
      label = hdplus02
      protocol = internal
      device = /dev/sci1
      caid = 1843
      rsakey = BF3xxxxxx...xxxxD5 # lässt
      boxkey = A76xxx..xx37C #16 stelliger boxkey, lässt sich ebenfalls leicht per google finden (Achtung es darf kein Leerzeichen drinne sein)
      detect = cd
      ecmwhitelist = 1843:89
      autospeed = 0
      mhz = 368
      cardmhz = 368
      ident = 1843:000000,003411,008011
      group = 2
      emmcache = 1,3,2
      auprovid = 003411

    • Habe ich gemacht. Jetzt kam folgender Log.

      • 2015/08/13 23:49:42 0970D02B r (reader) hdplus02 [internal] card detected
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] Calculated work ETU is 9.50 us reader mhz = 337
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75222
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
      • 2015/08/13 23:49:44 0970D02B r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      • 2015/08/13 23:49:45 0970D02B r (reader) hdplus02 [internal] detect native nagra card
      • 2015/08/13 23:49:48 0970D02B r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
      • 2015/08/13 23:49:50 0970D02B r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
      • 2015/08/13 23:49:51 0970D02B r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      • 2015/08/13 23:49:51 0970D02B r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      • 2015/08/13 23:49:51 0970D02B r (reader) hdplus02 [internal] Calculated work ETU is 9.50 us reader mhz = 337
      • 2015/08/13 23:49:51 0970D02B r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75201
      • 2015/08/13 23:49:52 0970D02B r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
      • 2015/08/13 23:49:52 0970D02B r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      • 2015/08/13 23:49:52 0970D02B r (reader) hdplus02 [internal] card system not supported
      • 2015/08/13 23:49:52 0970D02B r (reader) hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
      • 2015/08/13 23:49:54 0970D02B r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      • 2015/08/13 23:49:54 0970D02B r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      • 2015/08/13 23:49:54 0970D02B r (reader) hdplus02 [internal] Calculated work ETU is 124.00 us reader mhz = 300
      • 2015/08/13 23:49:54 0970D02B r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75225
      • 2015/08/13 23:49:54 0970D02B r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.00 Mhz (nearest possible mhz specified reader->mhz)
      • 2015/08/13 23:49:56 0970D02B r (reader) hdplus02 [internal] Warning: Card returned error on setting ifsd value to 160
      • 2015/08/13 23:49:57 0970D02B r (reader) hdplus02 [internal] detect native nagra card
      • 2015/08/13 23:50:00 0970D02B r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
      • 2015/08/13 23:50:02 0970D02B r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
      • 2015/08/13 23:50:03 0970D02B r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      • 2015/08/13 23:50:03 0970D02B r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      • 2015/08/13 23:50:03 0970D02B r (reader) hdplus02 [internal] Calculated work ETU is 10.67 us reader mhz = 300
      • 2015/08/13 23:50:03 0970D02B r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75198
      • 2015/08/13 23:50:04 0970D02B r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.00 Mhz (nearest possible mhz specified reader->mhz)
      • 2015/08/13 23:50:04 0970D02B r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      • 2015/08/13 23:50:07 0970D02B r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
      • 2015/08/13 23:50:09 0970D02B r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
      • 2015/08/13 23:50:10 0970D02B r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
      • 2015/08/13 23:50:10 0970D02B r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
      • 2015/08/13 23:50:10 0970D02B r (reader) hdplus02 [internal] Calculated work ETU is 10.67 us reader mhz = 300
      • 2015/08/13 23:50:10 0970D02B r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 75219
      • 2015/08/13 23:50:11 0970D02B r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.00 Mhz (nearest possible mhz specified reader->mhz)
      • 2015/08/13 23:50:11 0970D02B r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
      • 2015/08/13 23:50:11 0970D02B r (reader) hdplus02 [internal] card system not supported
      • 2015/08/13 23:50:11 0970D02B r (reader) hdplus02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
      • 2015/08/13 23:50:11 0970D02B r (reader) hdplus02 [internal] card initializing error