Hallo, bin neu hier im forum und habe schon einige beiträge gelesen. habe aber nichts gefunden was mir weiterhilft.
habe eine Azbox Premium HD, diese zeigt im display Booting an und das wars. habe bereits mit Putty, Pumpkin,
Filzilla über serielle schnittstelle probiert, die ganze prozedur mit ping und zugriff auf receiver funzt, doch nach dem update bleibt die box dennoch im Boot stehen.
meldung in Putty
__________________________________
**********************************
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
**********************************
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.
ROMFS found at 0xac080000, Volume name = MIPS_LINUX_XRPC
ac080040 : Name = ., Type = dir, Size = 00000000, Next = 00000040
ac080060 : Name = .., Type = hard link, Size = 00000000, Next = 00000060
ac080090 : Name = xrpc_xload_vmlinux_ES4_prod.bin, Type = file, Size = 0064bf44, Next = 00000000
Checking zboot signature.. it's not zboot file.
Error : Internal, code = ffffffff
YAMON>
__________________________________
kann es sein das ich einfach die falschen dateien benutzt habe?
Danke schon jetzt für weitere tipps
habe eine Azbox Premium HD, diese zeigt im display Booting an und das wars. habe bereits mit Putty, Pumpkin,
Filzilla über serielle schnittstelle probiert, die ganze prozedur mit ping und zugriff auf receiver funzt, doch nach dem update bleibt die box dennoch im Boot stehen.
meldung in Putty
__________________________________
**********************************
* YAMON ROM Monitor
* Revision 02.06-SIGMADESIGNS-01-2.8.0.1
**********************************
Memory: code: 0x11000000-0x11040000, 0x11200000-0x11204000
reserved data: 0x11240000-0x12440000, PCI memory: 0x12440000-0x12840000
Environment variable 'start' exists. After 1 seconds
it will be interpreted as a YAMON command and executed.
Press Ctrl-C (or do BREAK) to bypass this.
ROMFS found at 0xac080000, Volume name = MIPS_LINUX_XRPC
ac080040 : Name = ., Type = dir, Size = 00000000, Next = 00000040
ac080060 : Name = .., Type = hard link, Size = 00000000, Next = 00000060
ac080090 : Name = xrpc_xload_vmlinux_ES4_prod.bin, Type = file, Size = 0064bf44, Next = 00000000
Checking zboot signature.. it's not zboot file.
Error : Internal, code = ffffffff
YAMON>
__________________________________
kann es sein das ich einfach die falschen dateien benutzt habe?
Danke schon jetzt für weitere tipps
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von deejz ()