Boblight ist ein Plugin für ambientes Licht (vom Prinzip wie Ambilight von Phillips) ,es funktioniert mittlerweile mit sehr vielen Beleuchtungen der unterschiedlichsten Hersteller wie zb.
Karatelight, Oktolight ,Ardulight ,Adalight ,Atmolight ,Sedu ,Ibelight ,Ikea Dioder und mehr.
Ich selbst nutze es mit einer 50er Licherkette von Ardulight und es funktioniert richtig gut.
Boblight EnigmaLight
Es gibt von speedyisfast dem Entwickler mittlerweile eine Weiterentwicklung des Plugins unter dem neuem Namen Enigmalight welches sich aber noch im Betatest befindet (siehe Post 2)
Thx an speedyisfast für das Plugin
Karatelight, Oktolight ,Ardulight ,Adalight ,Atmolight ,Sedu ,Ibelight ,Ikea Dioder und mehr.
Ich selbst nutze es mit einer 50er Licherkette von Ardulight und es funktioniert richtig gut.
Boblight EnigmaLight
von speedyisfast
New Boblight-Enigma2
Update 0.5R9
- Cosmetic
- Better installation. (boblight.conf will be detected and not overwrited if exists)
- You can set a blacklevel in boblight.conf, so the light wil stay on by black pixels
- You can set gamma in plugin
- Lights go now off in standby (set standby mode to on in plugin)
- Threshold added in e2fronded plugin
- Startup/Sleep script fixed
- Wakeup problem fixed
- Blackbar detection (only top/bottom for now)
After installation, you need to start this script:
/usr/bin/boblight-dev.sh
This will install all packs you need.
Start/Stop Boblight without Plugin Frondend:
Start the grabber: /etc/init.d/boblight-control start
Stop the grabber: /etc/init.d/boblight-control stop
Restart grabber: /etc/init.d/boblight-control restart
Use other client, when grabber is sleeping
Start a boblight client on other box or pc.
On linux:
export DISPLAY=0:0
boblight-X11 -s iptodeamon -o value=10
On XMBC you can give a ip and port.
Test paterns:
Start boblightd -f in telnet
boblight-chase 1 ffcc gives you a chase (ctrl+c is cancel)
boblight-chase 3 ffcc gives you a rainbow
boblight-chase 4 ffcc gives you a rainbow
boblight-chase 5 ffcc00 gives you a color, this is orange/yellow
boblight-chase 5 cc0000 gives you a color, this is red
Atmolight users with 4 leds strips, can use the config in attachement. (Thanks to NietGiftig)
Rename to boblight.conf and replace in /etc
OE2.0 >> enigma2-plugin-extensions-boblight-enigma2_0.5r6_mips32el.ipk
OE1.6 >> enigma2-plugin-extensions-boblight-enigma2_0.5r6_mipsel.ipk
Whats nice:
- The user is the ability to define the zones in a conf-file, meaning the user is completely free to define the layouts him/herself.
- Many hardware can work with it.
- You can use 8 - 256 or more channels.
This version wil work on:
Karatelight
Oktolight
Adalight
Atmolight
Sedu
Ibelight
Ikea Dioder
and more...
You can use this on:
DM7025HD
DM500HD
DM800HD
DM8000
VU+DUO
VU+SOLO
VU+ULTIMO
ET9x00
ET5000
Don't forget to edit your config in /etc/boblight.conf
Es gibt von speedyisfast dem Entwickler mittlerweile eine Weiterentwicklung des Plugins unter dem neuem Namen Enigmalight welches sich aber noch im Betatest befindet (siehe Post 2)
Thx an speedyisfast für das Plugin
Plugin in der Datenbank
Kein support für Internet-Sharing!
und kein Support per PM (Fragen bitte ins Forum)
Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen
und kein Support per PM (Fragen bitte ins Forum)
Bitte füllt euer Profil aus (Box und Image) ,das erleichtert es uns Euch zu helfen
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Anz ()