NEW - Der Feed des Merlin Images jetzt bei BoxPirates - NEW

NEW - BoxPirates Plugin Feed - NEW
Unsere Plugins direkt über den Plugin Browser eure Box installierbar

KAthi 910 und mgcamd

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • KAthi 910 und mgcamd

      Tach auch,
      hatte vorher eine 910 mit aaf 2.0e und mgcamd an einer dm8000 mit oscam+cccam am laufen.
      Jetzt habe ich neutrino auf der kathi und mgcam installiert - lässt sich starten!
      leider meldet sich der user nicht am cccam auf der 8000 an.
      habe - so denke - ich alles wie vorher im aaf gemacht aber die kathi bleibt dunkel.
      andere clients mit cccam (DM500, DM7000, DBOX2) laufen nach wie vor - am server 8K kann es also nicht liegen.
      Habe ein mgcamd.log aber daraus werde ich beim besten willen nicht schlau.
      Jemand eine Idee was ich auf der kathi falsch mache?

      oder kann ich mgcamd auf der kathi im telnet starten und sehen wo der haken ist?
      mit welchem Befehl?

      hier die konfigs:

      mg_cfg

      # EMM messages
      # 00 don't show any EMMs (default)
      # 01 show only valid EMMs
      # 02 show valid and bad EMMs with complete data display
      M: { 01 }

      # ECM messages
      # 00 don't show anything about ecm
      # 01 normal mode, show pids processed, decoded ecm and cw
      # 02 verbose mode, show valid and bad ECMs with data
      C: { 01 }

      # AU
      # 00 disable, no emm pids processed
      # 01 enable, emm pids always processed for soft-au and shared cards
      # 02 auto, emm started only if channel cant be decoded
      # 03 process emm pids for network cards update only
      A: { 02 }

      # key update (sum 01 or 02 with 04)
      # 01 update only new keys, default setting
      # 02 update all keys (used for valid PMK checking)
      # 04 enable TPS au
      # + tps SID, which pmt pid contains au pid
      U: { 01 } 0x12c0

      # config files folder (softcam, autoroll, ignore/priority)
      # 00 files in /var/keys
      # 01 files in /tmp
      T: { 00 }

      # network mode, use summ for several clients
      # 00 no network (default)
      # 01 newcamd netclient
      # 02 radegast netclient
      # 04 camd3 netclient
      # 08 gbox netclient
      # 32 cccamd netclient, card list saved as /tmp/cccamd.info
      # (ECM only, supported server version up to 2.1.1, later not work)
      G: { 01 }

      # network retry, use summ for several options
      # 00 disable
      # 01 retry every new ecm
      # 02 try to connect to offline shares every Q: seconds
      # 04 try to detect and fast reconnect to lost (and not used atm) server
      # + XX messages number and YY seconds to reconnect
      # mg will reconnect to server, if no answer to last XX ecm/keepalive or
      # if no answer for last ecm or keepalive sent for YY seconds
      # set to 0 to disable
      N: { 07 } 5 30

      # network ecm timeout in seconds
      K: { 05 }

      # newcamd dead routes connect retry, sec
      Q: { 600 }

      # network shares priority
      # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
      # 01 camd3, radegast, cccamd, gbox, newcamd
      # 02 cccamd, newcamd, camd3, gbox, radegast
      P: { 00 }

      # on screen display type
      # 00 No OSD (default)
      # 01 neutrino
      # 02 enigma
      # 03 relook
      # + user password for http auth
      O: { 01 } username password

      # on screen display Options, summ of:
      # 01 show emu ecm
      # 02 show network shares messages
      # 04 show decoding failed / fta
      # 08 show emm keys update
      # + web port to use for osd
      S: { 03 } 80

      # Log option, summ of:
      # 00 off
      # 01 network udp log
      # 02 log to console
      # 04 file, appended ! delete it by yourself, before it eat all your hdd
      # + IP udp-port log-file-name
      L: { 06 } 127.0.0.1 28007 /tmp/mgcamd.log
      # keep ecm cache, seconds
      # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
      # for openbox/elanvision users with remote shares make sense to set it higher than default value,
      # to not hammer cards while timeshifting or playing crypted recordings.
      E: { 15 }

      # cache option, summ of:
      # 00 Off (default)
      # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
      # 02 Ecm data cache, remember CW for (E:) time
      # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
      H: { 07 }

      # reread files, summ of:
      # 00 No (default)
      # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
      # 02 reread SoftCam.Key on channel change
      # 04 reread SoftCam.Key if file changed
      R: { 00 }

      # debug, summ of
      # 00 off (default)
      # 01 debug ecm
      # 02 debug emm
      # 04 debug network ecm
      # 08 debug network emm
      # 16 debug network login
      # 32 show mem/cpu stats every 1 min
      # 64 add timestamp to log messages
      D: { 00 }

      # box type
      # 00 autodetect, change only if you think wrong type detected.
      # 01 dbox2
      # 02 dreambox
      # 03 triple-dragon
      # 04 relook
      # 05 openbox
      # 06 dreambox/mips
      # 08 stapi/kathrein
      # 09 stapi/ipbox
      # 11 stapi/openbox
      B: { 00 }

      # map all 180x nagra caids to 1801
      # default is 01
      F: { 01 }


      newcamd.list:

      CWS_KEEPALIVE = 300
      CWS = C: 192.168.0.40 62000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

      cccam.list (brauch ich die überhaupt?):

      C: 192.168.0.40 62000 user pass

      cccam.cfg auf der 8000:

      .
      .
      .
      F: user pass
      .
      .

    • ich glaub ich spinne....
      nächtelang herumgedoktert mit b=00 oder 08.
      wer kommt denn drauf dass man bei einer kathrein nicht kathrein einstellen soll - DANKE!!!!!!!!!!!!!!!!!!!!!

      Zumindest ist sie jetzt auf dem Server eingeloggt - schaue mal ob alles geht und vor allen Dingen nach CI+ - vielleicht kann ich Dir auch helfen!

    • Hi
      Trag mal in der Oscam.user deine kati ein als neuen Account
      wenn du CCCam in der Oscam aktiviert hast.
      ja die ccamd.list brauchst du,
      MfG Kiwi

      Edit: Jetzt laufen auch die HD+ Kanäle es musste nur der Wert F: auf 00 geändert werden. :up2:

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von Kiwipower ()


    • Hallo
      möchte die Oscam als cccamdclient...
      Oscam ist völliges neuland für mich...da sich die mgcamd mit cccam schon verbindet aber freezt nach einiger zeit....deshalb diese konstelation
      vielen dank im voraus

      mfg
      Erich