Neu: Ab sofort ist Boxpirates werbefrei!!!
... neuer Forenbereich - Smart Home - Interessant? - ... dann schaut mal rein. -> Klick



QboxHD mini 060 @przemo-g,sunshsin,daniel1544

    This site uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More details

    • QboxHD mini 060 @przemo-g,sunshsin,daniel1544

      QboxHD mini 060 @przemo-g,sunshsin,daniel1544
      Release "Stone Distribution" 0.0.60

      - Bugfix: Upgrade satellites.xml.
      - Bugfix: Upgrade terrestrial.xml (added transponder for Estonia).
      - Bugfix: Upgrade cables.xml (added transponder for Estonia).
      - Bugfix: Added the Estonian language.
      - Bugfix: The "TV Settings" menu is not displayed it when it is used the default skin.
      - Bugfix: Some options of "TV Settings" menu (Just scale, Letterbox, ect.) are not applied when the decoder is restarted.
      - Bugfix: Some minor bugfixes.


      lt6 2.0.36


      ================================================== ========== ========



      Nowy EMU menager

      niebiski / Emu menager lub dBugi niebieski

      dziaBajace emu

      - Mgcamd - configi var/keys (mg.cfg newcamd.list cccamd.list)

      - CCcam - configi var/keys (CCcam.cfg)

      - Mgcamd+ newcs - configi var/keys (mg.cfg newcamd.list cccamd.list) i var/tuxbox/config/newcs
      newcs webif ip_qboxhd:8888 ligin: qbox pasword qbox

      - mpcs - configi var/tuxbox/config/mpcs

      - vizcam - configi var/keys webif ip_qboxhd:8888 ligin: qbox pasword qbox

      - oscam - configi var/keys webif ip_qboxhd:8888 ligin: qbox pasword qbox

      - radar -configi var/etc


      jedyny maBy problem to po restarcie nie uruchamia sie automatycznie emu trzeba rcznie uruchomi



      plugins

      * SatAngels KeyUpdater E2
      * WebcamViewer
      * WeatherPlugin
      * VlcPlayer
      * SHOUTcast
      * PermanentClock
      * DMnapi
      * EnhancedEpg
      * epgimport
      * EPGSearch
      * crossEpg
      * GraphMultiEPG
      * LiveFootBall
      * GoogleMaps
      * GreekNetRadioE2
      * NetRadioClassic
      * SHOUTcast uruchomienie dBugi |óBty lub niebieski lub plugins
      * Transmission start blue Transmission lub plugins web ip_qboxhd:9091




      ----------------------------------------------------------------------------------------





      New EMU manager

      blue / Emu manager or a long blue

      running emu

      - Mgcamd 1.36 - config var / keys (mg.cfg newcamd.list cccamd.list)

      - CCcam - config var / keys (CCcam.cfg)

      - Mgcamd + newcs - config var / keys (mg.cfg newcamd.list cccamd.list) and var / tuxbox / config / newcs
      newcs Webif ip_qboxhd:8888 ligin: QBox pasword QBox

      - Mpcs - config var / tuxbox / config / mpcs

      - Vizcam - config var / keys Webif ip_qboxhd:8888 ligin: QBox pasword QBox

      - Oscam - config var / keys Webif ip_qboxhd:8888 ligin: QBox pasword QBox

      - radar - config var/etc


      the only small problem is that after restart does not start automatically, you must manually run the emu



      plugins

      * SatAngels KeyUpdater E2
      * WebcamViewer
      * WeatherPlugin
      * VlcPlayer
      * SHOUTcast
      * PermanentClock
      * DMnapi
      * EnhancedEpg
      * epgimport
      * EPGSearch
      * crossEpg
      * GraphMultiEPG
      * LiveFootBall
      * GoogleMaps
      * GreekNetRadioE2
      * NetRadioClassic
      * SHOUTcast -run long yellow or blue or plugins
      * Blue Transmission -Transmission start or web plugins ip_qboxhd:9091

      multiupload.com/2T9NW0VAB0


      :)

    • Mgcamd+NewCs don't work.

      Add or modify the following files.
      Emu + card server works fine.

      Ok for card 3.57Mhz. For card 6.0Mhz, change 357 to 600 in newcs.xml.
      ip_qboxhd:8888 login: qbox pasword qbox


      /var/keys/newcs.xml :
      ==============

      <?xml version="1.0"?>
      <newCSconfig>
      <readers name="Dreambox SCI">
      <device>
      <name>SCI Lower Slot</name>
      <type>sci</type>
      <mhz>357</mhz>
      <node>/dev/sci0</node>
      <parity>even</parity>
      <reset>normal</reset>
      <export>Yes</export>
      <enabled>Yes</enabled>
      <blocksa>No</blocksa>
      <blockua>No</blockua>
      <blockga>No</blockga>
      <blockc0>No</blockc0>
      <crypto-special>No</crypto-special>
      <PTShandshake>Yes</PTShandshake>
      <carddetect>yes</carddetect>
      <newcamd_port>30000</newcamd_port>
      <autosid>Yes</autosid>
      <Seca-PPV>no</Seca-PPV>
      <pincode>0000</pincode>
      <priority>round</priority>
      </device>
      <device>
      <name>SCI Upper Slot</name>
      <type>sci</type>
      <mhz>357</mhz>
      <node>/dev/sci1</node>
      <parity>even</parity>
      <reset>normal</reset>
      <export>Yes</export>
      <enabled>Yes</enabled>
      <blocksa>No</blocksa>
      <blockua>No</blockua>
      <blockga>No</blockga>
      <blockc0>No</blockc0>
      <crypto-special>No</crypto-special>
      <PTShandshake>Yes</PTShandshake>
      <carddetect>yes</carddetect>
      <newcamd_port>30001</newcamd_port>
      <autosid>Yes</autosid>
      <Seca-PPV>no</Seca-PPV>
      <pincode>0000</pincode>
      <priority>round</priority>
      </device>
      </readers>
      <radegastserver>
      <enabled>No</enabled>
      <port>10003</port>
      <allow>
      <hostname>localhost</hostname>
      </allow>
      </radegastserver>
      <cache>
      <emm>20</emm>
      <ecm>-1</ecm>
      </cache>
      <httpd>
      <server>
      <port>8888</port>
      <enabled>Yes</enabled>
      </server>
      <user>
      <name>qbox</name>
      <password>qbox</password>
      <accesslevel>admin</accesslevel>
      </user>
      </httpd>
      <debug>
      <password></password>
      <mode>advanced</mode>
      <level>internal</level>
      <type>all</type>
      <output>console,tcp</output>
      <console_options>internal,all</console_options>
      <logfile>/tmp/newcs.log</logfile>
      <file_options>internal,all</file_options>
      <tcp_port>3001</tcp_port>
      <tcp_options>internal,all</tcp_options>
      </debug>
      <newcamdserver>
      <enabled>Yes</enabled>
      <name>newcs</name>
      <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
      <user>
      <name>newcs</name>
      <password>newcs</password>
      <hostname>localhost</hostname>
      <au>On</au>
      <sidoverride>On</sidoverride>
      <readers>
      <allow>SCI Lower Slot</allow>
      <allow>SCI Upper Slot</allow>
      </readers>
      <spider>No</spider>
      <rate>1</rate>
      <cardlevel>0</cardlevel>
      </user>
      </newcamdserver>
      </newCSconfig>


      /var/keys/mg_cfg :
      ============

      M: { 01 }
      C: { 01 }
      A: { 01 }
      U: { 01 } 0x12c0
      T: { 00 }
      G: { 01 }
      N: { 07 } 5 30
      K: { 05 }
      Q: { 600 }
      P: { 00}
      O: { 00 } newcs newcs
      S: { 03 } 80
      L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
      E: { 15 }
      H: { 07 }
      R: { 00 }
      D: { 00 }
      B: { 11 }
      F: { 00 }

      /var/keys/newcamd.list :

      CWS_KEEPALIVE = 300
      CWS_INCOMING_PORT = 21000
      #
      CWS = 127.0.0.1 30000 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
      CWS = 127.0.0.1 30001 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs


      /usr/local/lib/enigma2/python/Plugins/Extensions/EMUmanager/start_Mgcamd_NewCS.sh :
      =======================================================

      Change "/var/bin/NewCS" by "/var/bin/NewCS -C /var/keys/newcs.xml"

    • Ja....leider.
      Seit unserem "Board-Crash" ist einiges verloren gegangen, leider.
      Du musst warten bis unser "knuth4" online ist, der wird dir sicher zu helfen versuchen. ;)
      Er ist unser "Spezi" für QBoxen.
      MfG, Biker
      MfG, Biker

      Ke Erger, ke Töibi, ke Stress
      FRAGEN GEHÖREN INS FORUM und nicht in mein Postfach !



      Wenn ihr unsere Arbeit unterstützen wollt, sind wir für jede Spende dankbar. Wir finanzieren das alles Privat, daher auch keine Werbung :-)
      boxpirates.to/index.php?donation/