Roy Image mega BKP QBOX HD version 1.0.16

eugen35 · 22. Oktober 2011, 01:28

Hallo ich braüchte mal eine RADAR.CFG Datei die richtig ausgefüllt ist um zu sehen
wie es sein sollte.
Komme mit den einstellungen nicht zurecht.
cfg ändern ist kein prop.
Aber was muss es sein. Radar emu eingeschaltet.
aber dann ???????????????????????
eugen35

knuth4 · 22. Oktober 2011, 14:23

wie gewünscht die .cfg der Radar
k4

[RaDar Cfg Version: 4.21]

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# -=- This new RaDaR 2.6 supports card server & emu inside =-=-
# -=- Now your QBoxHD can work as card server =-=-
# -=- to share your local Smartcards. =-=-
# -=- No more need for CCCam to make it work!! =-=-
# -=- =-=-
# -=- Supported Smartcards: =-=-
# -=- =-=-
# -=- * Viaccess =-=-
# -=- * Seca (with EMM) =-=-
# -=- * Irdeto (with EMM) =-=-
# -=- * Viaccess (with EMM) =-=-
# -=- * Nagra (mediaset and TvSat) no sharing (with EMM) =-=-
# -=- * NDz =-=-
# -=- * Cryptoworks =-=-
# -=- * Conax (with EMM) =-=-
# -=- * Minors =-=-
# -=- * HD+ =-=-
# -=- =-=-
# -=- Radar Client is compatibile with: =-=-
# -=- * CCCam Servers (tested only with server 2.0.11) =-=-
# -=- * GBox Servers =-=-
# -=- * NewCamD Servers =-=-
# -=- =-=-
# -=- Radar Server is compatibile with: =-=-
# -=- * Radar Clients only ATM =-=-
# -=- =-=-
# -=- Radar is extremely flexible and will search =-=-
# -=- on all possible servers to resolve the =-=-
# -=- control word on time. =-=-
# -=- =-=-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

#---------------------------------------------------------------------#
#------------------- GENERAL CONFIGURATIONS --------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-
# -= CARD LOG =-
# -=-=-=-=-=-=-=-
#Set this flag to "1" to enable add/remove !! CCCAM !! card log
cardlog: 0

# -=-=-=-=-=-=-=-=-
# -= QBOXHD LED =-
# -=-=-=-=-=-=-=-=-

# Use front panel leds for visible check out of send ecm/get cw ,
# please choose only one option: PANEL or BOARD
# you can also select which color give to your leds !( in HSV format)
# correct range value for HSV are: Hue(0-360) Saturation(0-100) Value(0-100)
# example: 'L: led_check_system PANEL 0 100 100' we want RED on front panel.

#L: led_check_system PANEL H S V
#L: led_check_system BOARD H S V

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# -= QBOXHD CARD SLOT CONFIGURATION =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

# Set this flag to enable internal Radar smartcard management.
# set "ON" or "OFF" for each smart slot of decoder (Upper or lower).
# ATTENTION !!
# Radar can work using NewCS as card reading system or its internal card reading system.
# Radar and NewCS cannot work both at the same time.
# Some combination can be applied.
# Here is an Example 1:
# [SmartCard Manager]
# UpperSlot=ON Radar Card reading system
# LowerSlot=OFF NewCS Card reading system (in this case you must add the NewCS line, see example 2)

[SmartCard Manager]
UpperSlot=ON
LowerSlot=ON

# Expample 2. Assign NewCS card reading line. (Remember to remove the first # to get it to work!)
#
# #Upper Slot (Port 30001) - (radar radar = username password) - (01 02 ... is the 3Des Key)
# N: 127.0.0.1 30001 radar radar 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# #Lower Slot (Port 30000) - (radar radar = username password) - (01 02 ... is the 3Des Key)
# N: 127.0.0.1 30000 radar radar 01 02 03 04 05 06 07 08 09 10 11 12 13 14

# ***********************************************************
# ***** E M U C O N F I G U R A T I O N *********
# ***********************************************************

[Internal Emu]

EnableInternalEMU=ON
#EnableInternalEMU=OFF

# ***********************************************************
# ***** C L I E N T C O N F I G U R A T I O N *********
# ***********************************************************

#---------------------------------------------------------------------#
#------------------- CCCAM OR GBOX CLIENT LINES ----------------------#
#---------------------------------------------------------------------#

# Insert here CCCam line (if you are a CCCam Client). Multiple line accepted.
# Insert here GBox line (if you are a GBox Client).
# You can insert ONLY one GBox line.

#---------------------------------------------------------------------#
#--------------------- RADAR CLIENT LINES ---------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-=-=-=-=-=-=-
# -= CLIENT CONFIGURATION =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-
# This option enables you to connect to a Radar Server.
# R: Line ----> Radar Server 1
# R: Line ----> Radar Server 2
# Multiple line are accepted.
# Any port can be used as long as server and client are using the same port (important).
#
# Example 3 Radar Client Line:
#
# | IP ADDRESS | or | SERVER NAME | PORT | USER

PASSWORD |
# R: 205.44.44.44 or servercs.servers.com 4000 user1 password1

# ***********************************************************
# ***** S E R V E R C O N F I G U R A T I O N *********
# ***********************************************************

#---------------------------------------------------------------------#
#----------------------RADAR CONFIG SERVER ---------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-
# -= SERVER ON or SERVER OFF =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-

[Set Server mode ON or OFF]
#ServerMode=ON
#ServerMode=OFF

# -=-=-=-=-=-=-=-=-=-
# -= SERVER's PORT =-
# -=-=-=-=-=-=-=-=-=-
# Please set here the server port number (xxx). Server port must be the same as client port.

[Set Server Port Number]
PortNumber=xxx

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# -= SERVER's USER LIST AND PRIVILEGES =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# This is the allowed to connect user list.
# Here you can set the users name and passwords that can connect to your server.
# You can decide how many accounts can be logged in simultanously. Extra connections will be denied.
# All parameters MUST be set.
# Sharing level is the number of re-sharing that can be done related to a control word.
#
# Example 4:
# |USER||PASSWORD||SHARING LEVEL||ACCOUNTS|
# F: user1 password1 2 3

[Allowed Users]

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# -= EXCLUDE ECM LIST =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-

# Here you can set a list of pairs < caid -- sid > which won't be processed by server.
# If the received ecm match one of theese rules it will be discard !

# Example 5:
# EXCLUDE 919 2dca
# incoming ecm with caid <0x919> and sid <0x2dca> will be discard !

# EXCLUDE caid sid